Air Conditioner Training in Stony Point NC 28678

Home > North Carolina

Commercial air conditioning systems are huge cooling units and consuming mammoth electricity. Added to that if the cooling system is pressured with obstructed air ways and dirty filters, you can imagine.
    3 Unlike home air conditioner, where the space needed to be cooled is less, for industrial air conditioners, it is a completely different story. By the time you figure out where the problem is, it might be
Stony Point NC 28678 too late. Hence, regular maintenance through air conditioning servicing agencies is a must.
download Problems and their possible remedies:

You may encounter day today problems with your air conditioner. Here are some simple steps to assess the problem.

A/C is not turning on

Most likely the a/c fuse might have got blown up. Change the fuse. If there is still no change, then you may have to look for broken wires Stony Point NC 28678 or loose connections in the electrical wiring. It is also possible that the switch is broken inside. Call a technician to check for these faults and replace the blown or loose or broken parts.

No cooling or very little cooling even when the temperature is actually pretty low

Check if any windows are open in the room. This might cause delay in the cooling process as hot air
Stony Point NC 28678 will keep raising the temperature. Close them if open. Next check if the belt of the compressor is loose or slipping. Over oiling might result in slipping. So tighten or replace as needed.

If the condenser filter is clogged, the cooling will not be efficient. You also need to check if any refrigerant is leaking out.

Odour

Odour can mean a lot of things. It can even mean a Stony Point NC 28678 dead mouse in the air ducts. So cleaning the air ducts as important as cleaning and wiping the cooling unit itself for health reasons. If the condensed water doesn’t have a proper outlet, then it drips inside the cooling unit and becomes stagnant, giving odour.
2 Noise

Loose nuts and bolts are the main cause for noises. Tighten the bolts and nuts and see if any of the parts Stony Point NC 28678 inside the a/c are touching each other to create such noise.

Sight glass problems

When there is refrigerant leak or when the system is undercharged, the sight glass gets clouded. This is an indication to repair leak and refill refrigerant.

Maintenance

Once a month: Clean the filters with mild detergent and dry before replacing.

Twice a year: Lubricate the motor and tighten the screws. Clean the water collecting tray and add Stony Point NC 28678 bleach to it.

Once a year: Clear the air ducts for debris and dead matter, clean the evaporator fins of dust and debris, wipe and clean the coils with corrosion-free detergent.

Air conditioning repair and maintenance are an important part of owning air con. Do it regularly to avoid problems.

hvac training for building managershvac training and certification

Surrounding Areas In North Carolina

  • Air Conditioner Training in Goldston NC 27252
  • Air Conditioner Training in Pfafftown NC 27040
  • Air Conditioner Training in Conover NC 28613
  • Air Conditioner Training in Grandy NC 27939
  • Air Conditioner Training in Tabor City NC 28463
  • Air Conditioner Training in Lake Lure NC 28746
  • Air Conditioner Training in Havelock NC 28532
  • Air Conditioner Training in Roanoke Rapids NC 27870
  • Air Conditioner Training in Banner Elk NC 28604
  • Air Conditioner Training in Manns Harbor NC 27953
  • Stony Point Information

    Video: Air Conditioner Training Schools in Stony Point NC

    [ssyelp location="Stony Point NC" term="schools" limit="10"]

    Air Conditioner Training in Lake Lure NC 28746

    Home > North Carolina

    Commercial air conditioning systems are huge cooling units and consuming mammoth electricity. Added to that if the cooling system is pressured with obstructed air ways and dirty filters, you can imagine.
        3 Unlike home air conditioner, where the space needed to be cooled is less, for industrial air conditioners, it is a completely different story. By the time you figure out where the problem is, it might be
    Lake Lure NC 28746 too late. Hence, regular maintenance through air conditioning servicing agencies is a must.
    download Problems and their possible remedies:

    You may encounter day today problems with your air conditioner. Here are some simple steps to assess the problem.

    A/C is not turning on

    Most likely the a/c fuse might have got blown up. Change the fuse. If there is still no change, then you may have to look for broken wires Lake Lure NC 28746 or loose connections in the electrical wiring. It is also possible that the switch is broken inside. Call a technician to check for these faults and replace the blown or loose or broken parts.

    No cooling or very little cooling even when the temperature is actually pretty low

    Check if any windows are open in the room. This might cause delay in the cooling process as hot air
    Lake Lure NC 28746 will keep raising the temperature. Close them if open. Next check if the belt of the compressor is loose or slipping. Over oiling might result in slipping. So tighten or replace as needed.

    If the condenser filter is clogged, the cooling will not be efficient. You also need to check if any refrigerant is leaking out.

    Odour

    Odour can mean a lot of things. It can even mean a Lake Lure NC 28746 dead mouse in the air ducts. So cleaning the air ducts as important as cleaning and wiping the cooling unit itself for health reasons. If the condensed water doesn’t have a proper outlet, then it drips inside the cooling unit and becomes stagnant, giving odour.
    2 Noise

    Loose nuts and bolts are the main cause for noises. Tighten the bolts and nuts and see if any of the parts Lake Lure NC 28746 inside the a/c are touching each other to create such noise.

    Sight glass problems

    When there is refrigerant leak or when the system is undercharged, the sight glass gets clouded. This is an indication to repair leak and refill refrigerant.

    Maintenance

    Once a month: Clean the filters with mild detergent and dry before replacing.

    Twice a year: Lubricate the motor and tighten the screws. Clean the water collecting tray and add Lake Lure NC 28746 bleach to it.

    Once a year: Clear the air ducts for debris and dead matter, clean the evaporator fins of dust and debris, wipe and clean the coils with corrosion-free detergent.

    Air conditioning repair and maintenance are an important part of owning air con. Do it regularly to avoid problems.

    hvac training for veteranscertified hvac technician

    Surrounding Areas In North Carolina

  • Air Conditioner Training in Mount Gilead NC 27306
  • Air Conditioner Training in Creston NC 28615
  • Air Conditioner Training in Pasquotank County NC
  • Air Conditioner Training in Sparta NC 28675
  • Air Conditioner Training in Elkin NC 28621
  • Air Conditioner Training in Aberdeen NC 28315
  • Air Conditioner Training in Fayetteville NC 28301
  • Air Conditioner Training in Louisburg NC 27549
  • Air Conditioner Training in Havelock NC 28532
  • Air Conditioner Training in Huntersville NC 28070
  • Lake Lure Information

    Video: Air Conditioner Training Schools in Lake Lure NC

    [ssyelp location="Lake Lure NC" term="schools" limit="10"]

    Air Conditioner Training in Wentworth NC 27375

    Home > North Carolina

    Commercial air conditioning systems are huge cooling units and consuming mammoth electricity. Added to that if the cooling system is pressured with obstructed air ways and dirty filters, you can imagine.
        3 Unlike home air conditioner, where the space needed to be cooled is less, for industrial air conditioners, it is a completely different story. By the time you figure out where the problem is, it might be
    Wentworth NC 27375 too late. Hence, regular maintenance through air conditioning servicing agencies is a must.
    download Problems and their possible remedies:

    You may encounter day today problems with your air conditioner. Here are some simple steps to assess the problem.

    A/C is not turning on

    Most likely the a/c fuse might have got blown up. Change the fuse. If there is still no change, then you may have to look for broken wires Wentworth NC 27375 or loose connections in the electrical wiring. It is also possible that the switch is broken inside. Call a technician to check for these faults and replace the blown or loose or broken parts.

    No cooling or very little cooling even when the temperature is actually pretty low

    Check if any windows are open in the room. This might cause delay in the cooling process as hot air
    Wentworth NC 27375 will keep raising the temperature. Close them if open. Next check if the belt of the compressor is loose or slipping. Over oiling might result in slipping. So tighten or replace as needed.

    If the condenser filter is clogged, the cooling will not be efficient. You also need to check if any refrigerant is leaking out.

    Odour

    Odour can mean a lot of things. It can even mean a Wentworth NC 27375 dead mouse in the air ducts. So cleaning the air ducts as important as cleaning and wiping the cooling unit itself for health reasons. If the condensed water doesn’t have a proper outlet, then it drips inside the cooling unit and becomes stagnant, giving odour.
    2 Noise

    Loose nuts and bolts are the main cause for noises. Tighten the bolts and nuts and see if any of the parts Wentworth NC 27375 inside the a/c are touching each other to create such noise.

    Sight glass problems

    When there is refrigerant leak or when the system is undercharged, the sight glass gets clouded. This is an indication to repair leak and refill refrigerant.

    Maintenance

    Once a month: Clean the filters with mild detergent and dry before replacing.

    Twice a year: Lubricate the motor and tighten the screws. Clean the water collecting tray and add Wentworth NC 27375 bleach to it.

    Once a year: Clear the air ducts for debris and dead matter, clean the evaporator fins of dust and debris, wipe and clean the coils with corrosion-free detergent.

    Air conditioning repair and maintenance are an important part of owning air con. Do it regularly to avoid problems.

    hvac training for engineershvac design training for engineers

    Surrounding Areas In North Carolina

  • Air Conditioner Training in Elm City NC 27822
  • Air Conditioner Training in Dobson NC 27017
  • Air Conditioner Training in Mount Ulla NC 28125
  • Air Conditioner Training in Dallas NC 28034
  • Air Conditioner Training in Carolina Beach NC 28428
  • Air Conditioner Training in Conover NC 28613
  • Air Conditioner Training in Eden NC 27288
  • Air Conditioner Training in Shallotte NC 28459
  • Air Conditioner Training in Farmville NC 27828
  • Air Conditioner Training in Salisbury NC 28144
  • Wentworth Information

    Video: Air Conditioner Training Schools in Wentworth NC

    [ssyelp location="Wentworth NC" term="schools" limit="10"]

    Air Conditioner Training in Bunn NC 27508

    Home > North Carolina

    I have been in the HVAC field for 27+ years. I started in the Navy as Boiler Technician and as a civilian worked with a few mechanical contractors, service companies and even an equipment manufacturer.
        3 When I was in the field, one of my most important tools (besides safety gear) was my electric testing meter. An essential troubleshooting tool for HVAC technician as well as electricians. From my own
    Bunn NC 27508 personal experience, this is one tool you shouldn’t skimp on. Spending a little more $$$ for the proper testing meter will go a long way. I know it can be hard to pass up the $100 meter for the $270 one, especially when you are young, just starting in the industry, and don’t have much cash. But trust me, if you buy the less expensive meter, you will Bunn NC 27508 pay for it in the end anyway.

    I will be honest and let you know I was one those techs that didn’t want to spend too much and bought the cheaper meter. Just starting out and thought a meter is a meter. Well I quickly learned it wasn’t worth it. I don’t want to bash any brand names out there, so I won’t specify the meter I bought. And
    Bunn NC 27508 I will say it wasn’t a terrible meter, and most of the time did the job well. But there were times when the reading was not very accurate, and after about 8 months, the casing starting coming apart. I also found one of the reason a meter may cost less, is it has a lower safety rating and you take a higher chance getting injured when using it Bunn NC 27508 on live circuits. I had to buy a new meter with-in the first year I was a technician. Always make sure your meter meets minimum requirements per NFPA-70E regulation (National Fire Protection Association).
    download Now I will tell you my favorite brand, which I am sure many of you will have heard of… Fluke. My 2nd meter was a Fluke. I have owned it for years, and it still works Bunn NC 27508 great. No, it isn’t the pretty Fluke yellow anymore, it has turned black over the years, but it is still very reliable. I don’t believe Fluke makes a meter that doesn’t meet the requirement for NFPA-70E. You can be rest assured they are built to last, be accurate, and keep you safe. They also offer one of the best warranties around.
    2 Meters have changed a little over the years, Bunn NC 27508 and some can now tie to your phone via Bluetooth, so you can view it from a safe distance when needed. If I was in the market to buy a new meter for the HVAC industry, I would go with one of the most popular models today- Fluke 902 FC True RMS clamp meter which is designed with the HVAC tech in mind.

    hvac certification schoolshvac training for mechanical engineers

    Surrounding Areas In North Carolina

  • Air Conditioner Training in Lewisville NC 27023
  • Air Conditioner Training in Butner NC 27509
  • Air Conditioner Training in Maggie Valley NC 28751
  • Air Conditioner Training in Asheville NC 28801
  • Air Conditioner Training in Mccutcheon Field NC 28545
  • Air Conditioner Training in Horse Shoe NC 28742
  • Air Conditioner Training in Mars Hill NC 28754
  • Air Conditioner Training in Lexington NC 27292
  • Air Conditioner Training in Welcome NC 27374
  • Air Conditioner Training in Brunswick NC 28424
  • Bunn Information

    Video: Air Conditioner Training Schools in Bunn NC

    [ssyelp location="Bunn NC" term="schools" limit="10"]

    Air Conditioner Training in Garner NC 27529

    Home > North Carolina

    I have been in the HVAC field for 27+ years. I started in the Navy as Boiler Technician and as a civilian worked with a few mechanical contractors, service companies and even an equipment manufacturer.
        3 When I was in the field, one of my most important tools (besides safety gear) was my electric testing meter. An essential troubleshooting tool for HVAC technician as well as electricians. From my own
    Garner NC 27529 personal experience, this is one tool you shouldn’t skimp on. Spending a little more $$$ for the proper testing meter will go a long way. I know it can be hard to pass up the $100 meter for the $270 one, especially when you are young, just starting in the industry, and don’t have much cash. But trust me, if you buy the less expensive meter, you will Garner NC 27529 pay for it in the end anyway.

    I will be honest and let you know I was one those techs that didn’t want to spend too much and bought the cheaper meter. Just starting out and thought a meter is a meter. Well I quickly learned it wasn’t worth it. I don’t want to bash any brand names out there, so I won’t specify the meter I bought. And
    Garner NC 27529 I will say it wasn’t a terrible meter, and most of the time did the job well. But there were times when the reading was not very accurate, and after about 8 months, the casing starting coming apart. I also found one of the reason a meter may cost less, is it has a lower safety rating and you take a higher chance getting injured when using it Garner NC 27529 on live circuits. I had to buy a new meter with-in the first year I was a technician. Always make sure your meter meets minimum requirements per NFPA-70E regulation (National Fire Protection Association).
    download Now I will tell you my favorite brand, which I am sure many of you will have heard of… Fluke. My 2nd meter was a Fluke. I have owned it for years, and it still works Garner NC 27529 great. No, it isn’t the pretty Fluke yellow anymore, it has turned black over the years, but it is still very reliable. I don’t believe Fluke makes a meter that doesn’t meet the requirement for NFPA-70E. You can be rest assured they are built to last, be accurate, and keep you safe. They also offer one of the best warranties around.
    2 Meters have changed a little over the years, Garner NC 27529 and some can now tie to your phone via Bluetooth, so you can view it from a safe distance when needed. If I was in the market to buy a new meter for the HVAC industry, I would go with one of the most popular models today- Fluke 902 FC True RMS clamp meter which is designed with the HVAC tech in mind.

    air conditioner training course onlinehvac certification cost

    Surrounding Areas In North Carolina

  • Air Conditioner Training in Concord NC 28025
  • Air Conditioner Training in Trenton NC 28585
  • Air Conditioner Training in Clyde NC 28721
  • Air Conditioner Training in Robbins NC 27325
  • Air Conditioner Training in Supply NC 28462
  • Air Conditioner Training in Windsor NC 27983
  • Air Conditioner Training in Banner Elk NC 28604
  • Air Conditioner Training in Advance NC 27006
  • Air Conditioner Training in Greensboro NC 27401
  • Air Conditioner Training in Smithfield NC 27577
  • Garner Information

    Video: Air Conditioner Training Schools in Garner NC

    [ssyelp location="Garner NC" term="schools" limit="10"]

    Air Conditioner Training in Old Fort NC 28762

    Home > North Carolina

    As the warmer weather quickly begins to arrive, people tend to spend more time in their yards. While maintaining the lawn, take a moment to inspect the outdoor air conditioning unit. This time of year is ideal to ensure the HVAC condenser is in great shape for the warm days of summer that lie ahead. Taking this time to give the unit a look can help prevent damage or an air
    Old Fort NC 28762 conditioner repair visit in the hottest part of the year. The following are some things to consider.
        3 Place a Barrier Around the Bottom of the Unit

    Placing a barrier near the base of the HVAC unit can have several advantages that will keep it in good condition. Large, flat rocks are some of the best things to use. They will keep dirt, debris, and small glass clippings from getting into the coils of Old Fort NC 28762 the system. Placing a barrier will also keep water from building up when it rains. It is even helpful for preventing muddy build up that can get on the shoes of the air conditioner repair person when he or she is servicing the system. Placing the barrier beneath the condenser can have some advantages as well, including keeping it level. This helps it run optimally.

    Keep Shrubbery from the Unit

    Many homeowners like
    Old Fort NC 28762 to plant bushes and shrubbery around the home, including around the HVAC system. Doing this does have some advantages, including keeping the noise from the system muffled as well as hiding the unit from view. While bushes can be helpful, it is crucial that they are not allowed to grow and invade the space of the condenser. Any branches that get too close can affect the performance and output of the Old Fort NC 28762 air conditioner. Large shrubbery or bushes can also make it difficult to have it serviced by a technician. Be sure to have the branches trimmed on a regular basis.
    download Do Not Cut Weeds Too Closely

    For those homeowners who prefer a perfectly manicured lawn, it is very tempting to remove any and all weed growth at the base of an HVAC condenser. A weed eater is typically the tool of choice for fast Old Fort NC 28762 weed removal; however, no one should use one near the unit unless they are familiar with its mechanics or are very careful. It can be incredibly easy to accidentally cut the main wire that connects the condenser to the system inside that cools the house. If possible, hand-weed areas near the back of the air conditioner so there is no risk of damage.
    2 It is crucial to be extremely careful when working Old Fort NC 28762 around an HVAC condenser. Any damage will require professional air conditioner repair services.

    epa certification hvachvac training and certification

    Surrounding Areas In North Carolina

  • Air Conditioner Training in Engelhard NC 27824
  • Air Conditioner Training in Advance NC 27006
  • Air Conditioner Training in Midland NC 28107
  • Air Conditioner Training in Murfreesboro NC 27855
  • Air Conditioner Training in Maxton NC 28364
  • Air Conditioner Training in Barnardsville NC 28709
  • Air Conditioner Training in Windsor NC 27983
  • Air Conditioner Training in Sneads Ferry NC 28460
  • Air Conditioner Training in Point Harbor NC 27964
  • Air Conditioner Training in Black Mountain NC 28711
  • Old Fort Information

    Video: Air Conditioner Training Schools in Old Fort NC

    [ssyelp location="Old Fort NC" term="schools" limit="10"]

    Air Conditioner Training in Tryon NC 28782

    Home > North Carolina

    Becoming an air conditioning repair professional can be a lucrative career choice but there are steps that must taken to accomplish this goal. The first step is to have a high school diploma or its equivalent. After high school, you should enroll and start taking classes at a trade school or community college. You may be able to secure employment with a company that specializes in Heating, Ventilation, and Air
    Tryon NC 28782 Conditioning (HVAC) and get on-the-job training from a professional that repairs these systems. This is also called an apprenticeship.
        3 Generally, it can take less than two years of schooling at a vocational school to learn air conditioning repair. In some high schools, you may be able to attend a vocational school for half of the school day to learn this trade. Many of the trade school and community colleges offer job Tryon NC 28782 placement services. In addition to learning air conditioning repair, you may also have the opportunity to take classes in auto air conditioning repair and refrigerator repair. All of these systems are very similar in operation. Once you have learned the theory it is just a matter of applying that theory to other types of cooling units. This will give you more options when choosing where you want to work.

    Although the
    Tryon NC 28782 theory is basically the same the practical application of that theory may not be similar. This is why it benefits to take classes. Whether it is an auto air conditioner, building or residential air conditioner, or refrigerator, accessing certain parts in the unit may be more difficult. One of the values in taking classes is that you will get practical experience working with the different units in different situations. All Tryon NC 28782 of this is done under the supervision of a qualified teacher.
    download If you join a branch of the military most will teach the soldiers a trade although some may devote almost all of their training to techniques in combat. Learning a trade is one of the benefits of joining the military. After getting out of the military, you may also qualify for additional money to continue your education.

    If you want to Tryon NC 28782 forgo the classes and just enter the workplace as an air conditioning repair professional you will need to find a HVAC company that is willing to hire someone with no experience. This can be difficult because most companies will have to take their time to train you before they can see a return on their investment, which is you.. If you have any mechanical repair experience stress that to your Tryon NC 28782 prospective employer.
    2 There is no best route to establish a career in air conditioning repair. How it is accomplished is up to the individual. If you cannot find an apprenticeship, you may need to take classes.

    training for hvac technicianschool hvac

    Surrounding Areas In North Carolina

  • Air Conditioner Training in Burnsville NC 28714
  • Air Conditioner Training in Marshville NC 28103
  • Air Conditioner Training in Monroe NC 28110
  • Air Conditioner Training in Selma NC 27576
  • Air Conditioner Training in Mill Spring NC 28756
  • Air Conditioner Training in Taylorsville NC 28681
  • Air Conditioner Training in Rutherford College NC 28671
  • Air Conditioner Training in Welcome NC 27374
  • Air Conditioner Training in Kill Devil Hills NC 27948
  • Air Conditioner Training in Spring Hope NC 27882
  • Tryon Information

    Video: Air Conditioner Training Schools in Tryon NC

    [ssyelp location="Tryon NC" term="schools" limit="10"]

    Air Conditioner Training in Morganton NC 28655

    Home > North Carolina

    I have been in the HVAC field for 27+ years. I started in the Navy as Boiler Technician and as a civilian worked with a few mechanical contractors, service companies and even an equipment manufacturer.
        3 When I was in the field, one of my most important tools (besides safety gear) was my electric testing meter. An essential troubleshooting tool for HVAC technician as well as electricians. From my own
    Morganton NC 28655 personal experience, this is one tool you shouldn’t skimp on. Spending a little more $$$ for the proper testing meter will go a long way. I know it can be hard to pass up the $100 meter for the $270 one, especially when you are young, just starting in the industry, and don’t have much cash. But trust me, if you buy the less expensive meter, you will Morganton NC 28655 pay for it in the end anyway.

    I will be honest and let you know I was one those techs that didn’t want to spend too much and bought the cheaper meter. Just starting out and thought a meter is a meter. Well I quickly learned it wasn’t worth it. I don’t want to bash any brand names out there, so I won’t specify the meter I bought. And
    Morganton NC 28655 I will say it wasn’t a terrible meter, and most of the time did the job well. But there were times when the reading was not very accurate, and after about 8 months, the casing starting coming apart. I also found one of the reason a meter may cost less, is it has a lower safety rating and you take a higher chance getting injured when using it Morganton NC 28655 on live circuits. I had to buy a new meter with-in the first year I was a technician. Always make sure your meter meets minimum requirements per NFPA-70E regulation (National Fire Protection Association).
    download Now I will tell you my favorite brand, which I am sure many of you will have heard of… Fluke. My 2nd meter was a Fluke. I have owned it for years, and it still works Morganton NC 28655 great. No, it isn’t the pretty Fluke yellow anymore, it has turned black over the years, but it is still very reliable. I don’t believe Fluke makes a meter that doesn’t meet the requirement for NFPA-70E. You can be rest assured they are built to last, be accurate, and keep you safe. They also offer one of the best warranties around.
    2 Meters have changed a little over the years, Morganton NC 28655 and some can now tie to your phone via Bluetooth, so you can view it from a safe distance when needed. If I was in the market to buy a new meter for the HVAC industry, I would go with one of the most popular models today- Fluke 902 FC True RMS clamp meter which is designed with the HVAC tech in mind.

    hvac training for mechanical engineershvac compressor

    Surrounding Areas In North Carolina

  • Air Conditioner Training in Maggie Valley NC 28751
  • Air Conditioner Training in Wilmington NC 28401
  • Air Conditioner Training in Black Creek NC 27813
  • Air Conditioner Training in Nashville NC 27856
  • Air Conditioner Training in Whittier NC 28789
  • Air Conditioner Training in Weaverville NC 28787
  • Air Conditioner Training in Willard NC 28478
  • Air Conditioner Training in Danbury NC 27016
  • Air Conditioner Training in Concord NC 28025
  • Air Conditioner Training in New London NC 28127
  • Morganton Information

    Video: Air Conditioner Training Schools in Morganton NC

    [ssyelp location="Morganton NC" term="schools" limit="10"]

    Air Conditioner Training in Browns Summit NC 27214

    Home > North Carolina

    Are you having problems with your central air conditioner? Qualified air conditioning technicians usually handle repairs of conditioning systems. But, there are some simple repairs and maintenance that you can do yourself.
        3 For example, your conditioning system doesn’t cool, what do you do? There are times wherein conditioning systems don’t cool because it needs cleaning. First, you need to turn off the power to the
    Browns Summit NC 27214 unit: unplug it from the main electrical system. Then rake leaves and debris away from the outdoor condenser.

    Next, remove any protective grille or cover from the condenser’s and use a soft brush to clean dirt and debris from the fins and then vacuum the dirt and debris with a brush attachment, making sure that you don’t damage the fins of your central air conditioner.  Browns Summit NC 27214 After that unscrew and lift the top grille off the unit and if the fan is attached to the grille, make sure that you don’t pull any wires loose.

    How about the inside unit? Well you will have to hose down the fins making sure that you protect the wiring and motor with plastic sheeting. Then, if needed, lubricate the motor making sure that you don’t
    Browns Summit NC 27214 over lubricate.

    Then, reassemble the unit and test it. Making sure that one of the pipes that connects to the condenser is warm and the other is cool. If this is not the case, you will need to call a central . While cleaning your system, make sure that you avoid straining the compressor by waiting at least five minutes before turning if off Browns Summit NC 27214 at the thermostat and turning it back on.
    download Well, how about if the air conditioner doesn’t turn on automatically? In this case, you have to make sure that the thermostat is set to cool and below the current temperature. The conditioning system should be on a 240-volt circuit, so check your main electrical panel and any secondary circuit panels as there might be a tripped breaker Browns Summit NC 27214 of blown fuse.

    Then make sure that the furnace power switch is turned on. Also, the outdoor condensers’ power switch should not been shut off as well as the 240 volt disconnect, which is next to the compressor, is also not shut off. Next, turn off the power to the central air conditioner and then check the thermostat. To do this, you need to remove the Browns Summit NC 27214 thermostat’s cover and unscrew the wire from the Y terminal and then you can turn the power back on.
    2 So how do you check it? Hold the wire by its insulation and touch the bare end to the R terminal. You have to hold it there for about two minutes and wait if the compressor kicks on, if it does, then the thermostat is faulty. Browns Summit NC 27214 In this case, you will need to call a technician and replace the thermostat. But, if the compressor of your conditioner doesn’t go on, you need to turn the power back off and call a technician.

    hvac repairhvac compressor

    Surrounding Areas In North Carolina

  • Air Conditioner Training in Naples NC 28760
  • Air Conditioner Training in Misenheimer NC 28109
  • Air Conditioner Training in Lenoir NC 28633
  • Air Conditioner Training in Yadkinville NC 27055
  • Air Conditioner Training in Elkin NC 28621
  • Air Conditioner Training in Trenton NC 28585
  • Air Conditioner Training in Bakersville NC 28705
  • Air Conditioner Training in Nags Head NC 27959
  • Air Conditioner Training in Middlesex NC 27557
  • Air Conditioner Training in Danbury NC 27016
  • Browns Summit Information

    Video: Air Conditioner Training Schools in Browns Summit NC

    [ssyelp location="Browns Summit NC" term="schools" limit="10"]

    Air Conditioner Training in Welcome NC 27374

    Home > North Carolina

    I have been in the HVAC field for 27+ years. I started in the Navy as Boiler Technician and as a civilian worked with a few mechanical contractors, service companies and even an equipment manufacturer.
        3 When I was in the field, one of my most important tools (besides safety gear) was my electric testing meter. An essential troubleshooting tool for HVAC technician as well as electricians. From my own
    Welcome NC 27374 personal experience, this is one tool you shouldn’t skimp on. Spending a little more $$$ for the proper testing meter will go a long way. I know it can be hard to pass up the $100 meter for the $270 one, especially when you are young, just starting in the industry, and don’t have much cash. But trust me, if you buy the less expensive meter, you will Welcome NC 27374 pay for it in the end anyway.

    I will be honest and let you know I was one those techs that didn’t want to spend too much and bought the cheaper meter. Just starting out and thought a meter is a meter. Well I quickly learned it wasn’t worth it. I don’t want to bash any brand names out there, so I won’t specify the meter I bought. And
    Welcome NC 27374 I will say it wasn’t a terrible meter, and most of the time did the job well. But there were times when the reading was not very accurate, and after about 8 months, the casing starting coming apart. I also found one of the reason a meter may cost less, is it has a lower safety rating and you take a higher chance getting injured when using it Welcome NC 27374 on live circuits. I had to buy a new meter with-in the first year I was a technician. Always make sure your meter meets minimum requirements per NFPA-70E regulation (National Fire Protection Association).
    download Now I will tell you my favorite brand, which I am sure many of you will have heard of… Fluke. My 2nd meter was a Fluke. I have owned it for years, and it still works Welcome NC 27374 great. No, it isn’t the pretty Fluke yellow anymore, it has turned black over the years, but it is still very reliable. I don’t believe Fluke makes a meter that doesn’t meet the requirement for NFPA-70E. You can be rest assured they are built to last, be accurate, and keep you safe. They also offer one of the best warranties around.
    2 Meters have changed a little over the years, Welcome NC 27374 and some can now tie to your phone via Bluetooth, so you can view it from a safe distance when needed. If I was in the market to buy a new meter for the HVAC industry, I would go with one of the most popular models today- Fluke 902 FC True RMS clamp meter which is designed with the HVAC tech in mind.

    hvac training for engineershvac degree online

    Surrounding Areas In North Carolina

  • Air Conditioner Training in Graham NC 27253
  • Air Conditioner Training in Rose Hill NC 28458
  • Air Conditioner Training in Hertford NC 27944
  • Air Conditioner Training in Monroe NC 28110
  • Air Conditioner Training in Pinetown NC 27865
  • Air Conditioner Training in Red Springs NC 28377
  • Air Conditioner Training in Reidsville NC 27320
  • Air Conditioner Training in West End NC 27376
  • Air Conditioner Training in Colfax NC 27235
  • Air Conditioner Training in Black Creek NC 27813
  • Welcome Information

    Video: Air Conditioner Training Schools in Welcome NC

    [ssyelp location="Welcome NC" term="schools" limit="10"]